Promotions
A promotion raises the speed of every plan, or of chosen plans, for a while: every Saturday twice the speed, three times the download every night, double speed the week of Christmas. The router looks every minute, by its own local time, and changes the speeds when a promotion starts or ends. Nobody has to be awake at 22:00 to turn it on.
Set them with dtvsol promo …, the API or the monitor’s
Services tab.
Examples
Section titled “Examples”dtvsol promo add saturday x2 days sat # every Saturday, all day, ×2dtvsol promo add nights x3 from 22:00 to 06:00 max 1000 # every night ×3, never above 1 Gb/sdtvsol promo add xmas down x2 start 2026-12-24 end 2026-12-31 # a week, download onlydtvsol promo add weekend-nights x2 days fri,sat from 20:00 to 02:00 plans plan_100_100,plan_200_200dtvsol promo # what runs now, every plan's speeddtvsol promo at "2026-10-03 23:30" # the speeds at another timedtvsol promo off nights # keep it, stop itdtvsol promo del xmasWhat a promotion says
Section titled “What a promotion says”| Word | Meaning |
|---|---|
x2 |
Download and upload ×2 (any number from 1 to 10: x1.5) |
down x3 / up x2 |
Only that direction (or different multipliers) |
max 1000 |
No speed above 1000 Mb/s, however large the multiplier |
days sat,sun |
The days of the week (all, or none: every day) |
from 22:00 to 06:00 |
The hours (none: the whole day). A window past midnight belongs to the day it starts: Friday 22:00–06:00 runs until Saturday 06:00 |
start / end |
The first and last day (YYYY-MM-DD) |
plans a,b |
The plans it raises (none: every plan) |
comment … |
What you tell the subscribers |
- Two promotions on the same plan do not multiply each other: the fastest wins, in each direction.
- A promotion never lowers a speed: a ceiling below a plan’s speed leaves the plan as it is.
dtvsol promo at …(and the monitor’s time field) shows every plan’s speed at any moment, to check a promotion before it starts.
Where the speed goes up
Section titled “Where the speed goes up”Each subscriber’s speed is limited in one place (Plans and shaping):
- Subscribers the router shapes (
shaper router): at once, when the promotion starts and ends. - Subscribers the OLT limits (services — most of them): the router changes the speed of the OLT’s traffic tables in place, within a minute of the promotion starting or ending. The service-ports on a table follow at once; no ONT is touched or interrupted, and it costs a few writes per OLT whatever the number of subscribers.
A traffic table is changed only when it is safe:
- every service-port on it is one of this router’s services (on its S-VLAN) — another operator’s tables, and the OLT’s default ones, are never touched;
- all the plans on it want the same speed now. Two plans that share a table but not a promotion
are a conflict: the table stays as it is, and
dtvsol promosays so.
The router looks at the tables again every 30 minutes (an OLT restarted from its saved configuration, a table changed by hand), and five minutes after a change that failed; a failure is also an alarm.
dtvsol promo (and the monitor’s Services tab) shows every OLT table: its rate, the plans on it,
and whether it is ok, changed, a conflict or shared.
Each plan its own tables
Section titled “Each plan its own tables”The router gives every plan its own traffic tables on the OLT, one for download and one for upload, so a promotion can raise one plan alone, in one direction. New services get them. Services made before are still on tables shared by speed:
dtvsol promo tables # which services are on their plan's own tablesdtvsol promo move-tables olt-1 # what would be moveddtvsol promo move-tables olt-1 --yes # move themMoving makes each service’s internet service-port again on its plan’s tables: each ONU loses its connection for a few seconds, one after the other. Do it in a quiet hour. Until then, a promotion still reaches a shared table whenever all its plans are raised alike (a promotion for every plan, the same in both directions).
This site was written with the help of AI and checked by our team.